Skip to documentation content

Documentation · Data

Scatter plot

Write the points as (across, up) pairs, grouped into series. Everything here is also a control in the Chart panel.

Open Scatter plot

When to use it

Plot paired measurements against two numeric axes, with optional series and a trend line.

Each point is an x/y pair. A fitted trend describes the supplied data; it does not establish causation or validate a research claim.

Working example

Copy this complete example into the Source tab, then press Generate. Change its labels or values to make your first version.

Tingraph source
scatter "Local Index by Year" {
  x "Year"
  y "Local index"
  trend on

  series "Local index"
    (1900, 10) (1901, 9) (1902, 12) (1903, 15) (1904, 9) (1905, 40)
    (1906, 4) (1907, 19) (1908, 25) (1909, 14) (1910, 20) (1911, 38)
    (1912, 30) (1913, 60) (1914, 75) (1915, 55) (1916, 89) (1917, 95)
    (1918, 69) (1919, 100) (1920, 92)
}

Syntax reference

The same reference used by the editor and AI briefing. Syntax is notation-specific; use the keywords listed here.

Chart

SyntaxMeaning
scatter "Title" {open a scatter plot

Points

SyntaxMeaning
(12, 40)one point, across then up
(12, 40) "A. Cabbell"a point with a name beside it
series "Japan" (13, 4)a named cloud of points
series "J" "#e34948" (13, 4)a cloud in a colour of its own

Cloud

SyntaxMeaning
trend onone straight line of best fit
markers ondraw the points themselves

Axes

SyntaxMeaning
x "Caption"caption under the across axis
y "Caption"caption beside the up axis
grid valuenone, value, category, both
range 0 250pin where the value axis runs

Look

SyntaxMeaning
colors colorfulauto, single, colorful, warm, cool, ink
colors "#2a78d6"one colour, pinned
style framedplain, ruled, framed, bold
legend bottomauto, none, right, bottom, top
values onwrite the number on every mark
size 520 340how big the chart is drawn
# commentline comment (also //)

Language rules

  • The file is one scatter "Title" { ... } block. Nothing may sit outside it.
  • A reading is Name 40, one per line, and draws a point per reading. A name with a space or a comma in it goes in quotes.
  • Settings are written as name value, in any order, before or after the readings.
  • A word that is a setting name is never read as a reading; quote it if you need it as a name.
  • Use series only when there is more than one thing being measured; a single series needs no series line at all.
  • Do not invent settings. Every one the language has is listed above.

Edit on the canvas

  • Drag individual points to change their coordinates; use the chart panel for exact values and named series.
  • Choose axis ranges, point labels and the trend line through the chart settings.

Generate replaces the drawing from source. Save before generating again if you want to preserve manual finishing touches.

Read Saving & exporting

Write it with an assistant

Tingraph AI already knows this notation. For another assistant, copy the tutorial below, describe your diagram under MY DIAGRAM, then paste the returned source into the editor. This prompt includes every syntax row, rule and working example above.

Read the complete prompt
You are writing Tingraph source. Tingraph is a small text language that draws a scatter plot. Answer with Tingraph source only.

SYNTAX
Chart
  scatter "Title" {           open a scatter plot

Points
  (12, 40)                    one point, across then up
  (12, 40) "A. Cabbell"       a point with a name beside it
  series "Japan" (13, 4)      a named cloud of points
  series "J" "#e34948" (13, 4)  a cloud in a colour of its own

Cloud
  trend on                    one straight line of best fit
  markers on                  draw the points themselves

Axes
  x "Caption"                 caption under the across axis
  y "Caption"                 caption beside the up axis
  grid value                  none, value, category, both
  range 0 250                 pin where the value axis runs

Look
  colors colorful             auto, single, colorful, warm, cool, ink
  colors "#2a78d6"            one colour, pinned
  style framed                plain, ruled, framed, bold
  legend bottom               auto, none, right, bottom, top
  values on                   write the number on every mark
  size 520 340                how big the chart is drawn
  # comment                   line comment (also //)

RULES
- The file is one `scatter "Title" { ... }` block. Nothing may sit outside it.
- A reading is `Name 40`, one per line, and draws a point per reading. A name with a space or a comma in it goes in quotes.
- Settings are written as `name value`, in any order, before or after the readings.
- A word that is a setting name is never read as a reading; quote it if you need it as a name.
- Use `series` only when there is more than one thing being measured; a single series needs no `series` line at all.
- Do not invent settings. Every one the language has is listed above.

WORKED EXAMPLE
scatter "Local Index by Year" {
  x "Year"
  y "Local index"
  trend on

  series "Local index"
    (1900, 10) (1901, 9) (1902, 12) (1903, 15) (1904, 9) (1905, 40)
    (1906, 4) (1907, 19) (1908, 25) (1909, 14) (1910, 20) (1911, 38)
    (1912, 30) (1913, 60) (1914, 75) (1915, 55) (1916, 89) (1917, 95)
    (1918, 69) (1919, 100) (1920, 92)
}

OUTPUT
- Reply with one fenced code block and nothing else.
- The block starts with `scatter "…" {` and ends with `}`.
- Do not invent keywords: use only the ones listed above.
- Keep labels short enough to read inside a box, and keep every ID unique.

MY DIAGRAM
Describe what you want here, then send this message.
How AI requests, attachments and privacy work

Something unclear? Contact support or read the Privacy Policy.